BLE GAPM API. More...

#include "ble_error.h"
#include "ble_gapc.h"
#include <stdint.h>
#include <stddef.h>

Classes
struct	ble_gap_adv_param_t
	Advertising parameters for legacy advertising. More...

struct	ble_gap_adv_prim_cfg_t
	Configuration for advertising on primary channel. More...

struct	ble_gap_adv_second_cfg_t
	Configuration for advertising on secondary channel. More...

struct	ble_gap_adv_period_cfg_t
	Configuration for periodic advertising. More...

struct	ble_gap_ext_adv_param_t
	Advertising parameters for extended advertising and periodic advertising. More...

struct	ble_gap_adv_time_param_t
	Advertising timing parameter. More...

struct	ble_gap_sec_key_t
	Security key. More...

struct	ble_gap_scan_param_t
	Parameters for legacy scanning. More...

struct	ble_gap_scan_wd_op_param_t
	Scan Window operation parameters. More...

struct	ble_gap_ext_scan_param_t
	Parameters for extended scanning. More...

struct	ble_gap_period_adv_addr_cfg_t
	Periodic advertising information. More...

struct	ble_gap_per_sync_param_t
	Periodic advertising synchronization parameters. More...

struct	ble_gap_init_param_t
	Legacy initiating parameters. More...

struct	ble_gap_ext_conn_param_t
	Connection parameters. More...

struct	ble_gap_ext_init_param_t
	Extended initiating parameters. More...

struct	ble_gap_lepsm_register_t
	LE Protocol/Service Multiplexer information. More...

struct	ble_gap_bond_dev_list_t
	Bonded device list. More...

struct	ble_gap_white_list_t
	White list. More...

struct	ble_gap_period_adv_list_t
	Periodic advertising list. More...

struct	ble_gap_ral_dev_info_t
	RPA list item info. More...

struct	ble_gap_ral_dev_list_t
	RPA list info. More...

struct	ble_gap_evt_adv_stop_t
	Advertising Stop info. More...

struct	ble_gap_evt_scan_req_t
	Scan request info. More...

struct	ble_gap_evt_scan_stop_t
	Scan Stop info struct. More...

struct	ble_gap_evt_adv_report_t
	Advertising report event for BLE_GAPM_EVT_ADV_REPORT. More...

struct	ble_gap_evt_sync_established_t
	Sync established event for BLE_GAPM_EVT_SYNC_ESTABLISH. More...

struct	ble_gap_evt_rslv_addr_read_t
	Read resolvable address event for BLE_GAPM_EVT_READ_RSLV_ADDR. More...

struct	ble_gapm_evt_t
	BLE GAPM event structure. More...

Macros
#define	CO_BIT(pos) (1UL<<(pos))

#define	BLE_GAP_MAX_ADV_NUM 5

#define	BLE_GAP_MAX_PER_SYNC_NUM 5

#define	BLE_GAP_MAX_BOND_NUM 10

#define	BLE_GAP_MAX_WL_NUM 10

#define	BLE_GAP_MAX_PRD_ADV_NUM 4

#define	BLE_GAP_MAX_KEY_LEN 16

#define	BLE_GAP_NVALID_ADV_IDX 0xFF

#define	BLE_GAP_DEVNAME_DEFAULT "GOODIX_BLE"

#define	BLE_GAP_DEVNAME_MAX_LEN 248

#define	BLE_APPEARANCE_UNKNOWN 0

#define	BLE_APPEARANCE_GENERIC_PHONE 64

#define	BLE_APPEARANCE_GENERIC_COMPUTER 128

#define	BLE_APPEARANCE_GENERIC_WATCH 192

#define	BLE_APPEARANCE_WATCH_SPORTS_WATCH 193

#define	BLE_APPEARANCE_GENERIC_CLOCK 256

#define	BLE_APPEARANCE_GENERIC_DISPLAY 320

#define	BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384

#define	BLE_APPEARANCE_GENERIC_EYE_GLASSES 448

#define	BLE_APPEARANCE_GENERIC_TAG 512

#define	BLE_APPEARANCE_GENERIC_KEYRING 576

#define	BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640

#define	BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704

#define	BLE_APPEARANCE_GENERIC_THERMOMETER 768

#define	BLE_APPEARANCE_THERMOMETER_EAR 769

#define	BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832

#define	BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833

#define	BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896

#define	BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897

#define	BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898

#define	BLE_APPEARANCE_GENERIC_HID 960

#define	BLE_APPEARANCE_HID_KEYBOARD 961

#define	BLE_APPEARANCE_HID_MOUSE 962

#define	BLE_APPEARANCE_HID_JOYSTICK 963

#define	BLE_APPEARANCE_HID_GAMEPAD 964

#define	BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965

#define	BLE_APPEARANCE_HID_CARD_READER 966

#define	BLE_APPEARANCE_HID_DIGITAL_PEN 967

#define	BLE_APPEARANCE_HID_BARCODE 968

#define	BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024

#define	BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088

#define	BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089

#define	BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090

#define	BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091

#define	BLE_APPEARANCE_GENERIC_CYCLING 1152

#define	BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153

#define	BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154

#define	BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155

#define	BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156

#define	BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157

#define	BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 3136

#define	BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 3137

#define	BLE_APPEARANCE_PULSE_OXIMETER_WRIST_WORN 3138

#define	BLE_APPEARANCE_GENERIC_WEIGHT_SCALE 3200

#define	BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS_ACT 5184

#define	BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_DISP 5185

#define	BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_DISP 5186

#define	BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_POD 5187

#define	BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_POD 5188

#define	BLE_GAP_PHY_ANY 0x00

#define	BLE_GAP_PHY_LE_1MBPS (1 << 0)

#define	BLE_GAP_PHY_LE_2MBPS (1 << 1)

#define	BLE_GAP_PHY_LE_CODED (1 << 2)

#define	BLE_GAP_ADV_CHANNEL_37 0x01

#define	BLE_GAP_ADV_CHANNEL_38 0x02

#define	BLE_GAP_ADV_CHANNEL_39 0x04

#define	BLE_GAP_ADV_CHANNEL_37_38_39 0x07

Typedefs
typedef void(*	ble_gap_reslv_rpa_addr_callback_t) (uint8_t status, ble_gap_bdaddr_t *iden_addr, uint8_t src_info)
	The BLE reslove rpa address callback. More...

typedef void(*	ble_gap_rpa_addr_report_callback_t) (ble_gap_actv_type_t type, uint8_t index, const uint8_t *rpa_addr)
	The BLE rpa address report callback. More...

Enumerations
enum	ble_gap_role_t { BLE_GAP_ROLE_NONE = 0x00, BLE_GAP_ROLE_OBSERVER = 0x01, BLE_GAP_ROLE_BROADCASTER = 0x02, BLE_GAP_ROLE_CENTRAL = (0x04 \| BLE_GAP_ROLE_OBSERVER), BLE_GAP_ROLE_PERIPHERAL = (0x08 \| BLE_GAP_ROLE_BROADCASTER), BLE_GAP_ROLE_ALL = (BLE_GAP_ROLE_CENTRAL \| BLE_GAP_ROLE_PERIPHERAL) }
	GAP role options. More...

enum	ble_gap_own_addr_t { BLE_GAP_OWN_ADDR_STATIC = 0, BLE_GAP_OWN_ADDR_GEN_RSLV, BLE_GAP_OWN_ADDR_GEN_NON_RSLV }
	Own BD address source of the device. More...

enum	ble_gap_dev_name_write_perm_t { BLE_GAP_WRITE_PERM_DISABLE = 0, BLE_GAP_WRITE_PERM_NOAUTH, BLE_GAP_WRITE_PERM_UNAUTH, BLE_GAP_WRITE_PERM_AUTH, BLE_GAP_WRITE_PERM_SEC_CON }
	Write permissions of the device name characteristic. More...

enum	ble_gap_adv_data_type_t { BLE_GAP_ADV_DATA_TYPE_DATA = 0, BLE_GAP_ADV_DATA_TYPE_SCAN_RSP, BLE_GAP_ADV_DATA_TYPE_PER_DATA }
	Advertising data type. More...

enum	ble_gap_dev_info_get_type_t { BLE_GAP_GET_DEV_VERSION = 0, BLE_GAP_GET_DEV_BDADDR, BLE_GAP_GET_SUGGESTED_DFLT_LE_DATA_LEN, BLE_GAP_GET_MAX_LE_DATA_LEN, BLE_GAP_GET_NB_ADV_SETS, BLE_GAP_GET_MAX_LE_ADV_DATA_LEN, BLE_GAP_GET_DEV_TX_POWER, BLE_GAP_GET_DEV_RF_RF_PATH_COMP }
	Get device parameters operation code. More...

enum	ble_gap_adv_mode_t { BLE_GAP_ADV_TYPE_ADV_IND = 0, BLE_GAP_ADV_TYPE_ADV_NONCONN_IND, BLE_GAP_ADV_TYPE_ADV_SCAN_IND, BLE_GAP_ADV_TYPE_ADV_HIGH_DIRECT_IND, BLE_GAP_ADV_TYPE_ADV_LOW_DIRECT_IND }
	GAP advertising modes. More...

enum	ble_gap_disc_mode_t { BLE_GAP_DISC_MODE_NON_DISCOVERABLE = 0, BLE_GAP_DISC_MODE_GEN_DISCOVERABLE, BLE_GAP_DISC_MODE_LIM_DISCOVERABLE, BLE_GAP_DISC_MODE_BROADCASTER }
	GAP discoverability modes. More...

enum	ble_gap_adv_filter_policy_t { BLE_GAP_ADV_ALLOW_SCAN_ANY_CON_ANY = 0, BLE_GAP_ADV_ALLOW_SCAN_WLST_CON_ANY, BLE_GAP_ADV_ALLOW_SCAN_ANY_CON_WLST, BLE_GAP_ADV_ALLOW_SCAN_WLST_CON_WLST }
	Advertising filter policy. More...

enum	ble_gap_le_phy_value_t { BLE_GAP_PHY_UNDEF_VALUE = 0, BLE_GAP_PHY_1MBPS_VALUE = 1, BLE_GAP_PHY_2MBPS_VALUE = 2, BLE_GAP_PHY_CODED_VALUE = 3 }
	Specify what PHY the Controller has changed for TX/RX. HCI:7.7.65.12. More...

enum	ble_gap_adv_type_t { BLE_GAP_ADV_TYPE_LEGACY = 0, BLE_GAP_ADV_TYPE_EXTENDED, BLE_GAP_ADV_TYPE_PERIODIC }
	Advertising type. More...

enum	ble_gap_adv_prop_pos_t { BLE_GAP_ADV_PROP_CONNECTABLE_POS = 0, BLE_GAP_ADV_PROP_SCANNABLE_POS, BLE_GAP_ADV_PROP_DIRECTED_POS, BLE_GAP_ADV_PROP_HDC_POS, BLE_GAP_ADV_PROP_USE_LEGACY_PDUS_POS, BLE_GAP_ADV_PROP_ANONYMOUS_POS, BLE_GAP_ADV_PROP_TX_PWR_POS, BLE_GAP_ADV_PROP_PER_TX_PWR_POS, BLE_GAP_ADV_PROP_SCAN_REQ_NTF_EN_POS }
	Advertising properties bit field and bit positions. More...

enum	ble_gap_adv_prop_t { BLE_GAP_ADV_PROP_CONNECTABLE_BIT = CO_BIT(BLE_GAP_ADV_PROP_CONNECTABLE_POS), BLE_GAP_ADV_PROP_SCANNABLE_BIT = CO_BIT(BLE_GAP_ADV_PROP_SCANNABLE_POS), BLE_GAP_ADV_PROP_DIRECTED_BIT = CO_BIT(BLE_GAP_ADV_PROP_DIRECTED_POS), BLE_GAP_ADV_PROP_HDC_BIT = CO_BIT(BLE_GAP_ADV_PROP_HDC_POS), BLE_GAP_ADV_PROP_USE_LEGACY_PDUS_BIT = CO_BIT(BLE_GAP_ADV_PROP_USE_LEGACY_PDUS_POS), BLE_GAP_ADV_PROP_ANONYMOUS_BIT = CO_BIT(BLE_GAP_ADV_PROP_ANONYMOUS_POS), BLE_GAP_ADV_PROP_TX_PWR_BIT = CO_BIT(BLE_GAP_ADV_PROP_TX_PWR_POS), BLE_GAP_ADV_PROP_PER_TX_PWR_BIT = CO_BIT(BLE_GAP_ADV_PROP_PER_TX_PWR_POS), BLE_GAP_ADV_PROP_SCAN_REQ_NTF_EN_BIT = CO_BIT(BLE_GAP_ADV_PROP_SCAN_REQ_NTF_EN_POS) }
	Advertising properties bit field bit value. More...

enum	ble_gap_scan_type_t { BLE_GAP_SCAN_ACTIVE = 0, BLE_GAP_SCAN_PASSIVE }
	Scanning types. More...

enum	ble_gap_scan_mode_t { BLE_GAP_SCAN_GEN_DISC_MODE = 0, BLE_GAP_SCAN_LIM_DISC_MODE, BLE_GAP_SCAN_OBSERVER_MODE }
	Scanning modes. More...

enum	ble_gap_scan_dup_filt_policy_t { BLE_GAP_SCAN_FILT_DUPLIC_DIS = 0, BLE_GAP_SCAN_FILT_DUPLIC_EN }
	Duplicate filter policy. More...

enum	ble_gap_ext_scan_type_t { BLE_GAP_EXT_SCAN_TYPE_GEN_DISC = 0, BLE_GAP_EXT_SCAN_TYPE_LIM_DISC, BLE_GAP_EXT_SCAN_TYPE_OBSERVER, BLE_GAP_EXT_SCAN_TYPE_SEL_OBSERVER, BLE_GAP_EXT_SCAN_TYPE_CONN_DISC, BLE_GAP_EXT_SCAN_TYPE_SEL_CONN_DISC }
	Extended scanning types. More...

enum	ble_gap_ext_scan_dup_filt_policy_t { BLE_GAP_EXT_DUP_FILT_DIS = 0, BLE_GAP_EXT_DUP_FILT_EN, BLE_GAP_EXT_DUP_FILT_EN_PERIOD }
	Filtering policy for duplicated packets. More...

enum	ble_gap_init_type_t { BLE_GAP_INIT_TYPE_DIRECT_CONN_EST = 0, BLE_GAP_INIT_TYPE_AUTO_CONN_EST, BLE_GAP_INIT_TYPE_NAME_DISC }
	Initiating types. More...

enum	ble_gap_init_prop_t { BLE_GAP_INIT_PROP_1M_BIT = (1 << 0), BLE_GAP_INIT_PROP_2M_BIT = (1 << 1), BLE_GAP_INIT_PROP_CODED_BIT = (1 << 2) }
	Initiating properties. More...

enum	ble_gap_scan_prop_t { BLE_GAP_SCAN_PROP_PHY_1M_BIT = (1 << 0), BLE_GAP_SCAN_PROP_PHY_CODED_BIT = (1 << 1), BLE_GAP_SCAN_PROP_ACTIVE_1M_BIT = (1 << 2), BLE_GAP_SCAN_PROP_ACTIVE_CODED_BIT = (1 << 3), BLE_GAP_SCAN_PROP_ACCEPT_RPA_BIT = (1 << 4), BLE_GAP_SCAN_PROP_FILT_TRUNC_BIT = (1 << 5) }
	Scanning properties bit field bit value. More...

enum	ble_gap_per_sync_type_t { BLE_GAP_PER_SYNC_TYPE_GENERAL = 0, BLE_GAP_PER_SYNC_TYPE_SELECTIVE }
	Periodic synchronization types. More...

enum	ble_gap_sec_lvl_type_t { BLE_GAP_SEC_LVL_NO_SECURITY = 0, BLE_GAP_SEC_LVL_ENC_NO_AUTH, BLE_GAP_SEC_LVL_LE_ENC_AUTH, BLE_GAP_SEC_LVL_SC_ENC_AUTH }
	Security level types. More...

enum	ble_gap_ad_type_t { BLE_GAP_AD_TYPE_FLAGS = 0x01, BLE_GAP_AD_TYPE_MORE_16_BIT_UUID = 0x02, BLE_GAP_AD_TYPE_COMPLETE_LIST_16_BIT_UUID = 0x03, BLE_GAP_AD_TYPE_MORE_32_BIT_UUID = 0x04, BLE_GAP_AD_TYPE_COMPLETE_LIST_32_BIT_UUID = 0x05, BLE_GAP_AD_TYPE_MORE_128_BIT_UUID = 0x06, BLE_GAP_AD_TYPE_COMPLETE_LIST_128_BIT_UUID = 0x07, BLE_GAP_AD_TYPE_SHORTENED_NAME = 0x08, BLE_GAP_AD_TYPE_COMPLETE_NAME = 0x09, BLE_GAP_AD_TYPE_TRANSMIT_POWER = 0x0A, BLE_GAP_AD_TYPE_CLASS_OF_DEVICE = 0x0D, BLE_GAP_AD_TYPE_SP_HASH_C = 0x0E, BLE_GAP_AD_TYPE_SP_RANDOMIZER_R = 0x0F, BLE_GAP_AD_TYPE_TK_VALUE = 0x10, BLE_GAP_AD_TYPE_OOB_FLAGS = 0x11, BLE_GAP_AD_TYPE_SLAVE_CONN_INT_RANGE = 0x12, BLE_GAP_AD_TYPE_RQRD_16_BIT_SVC_UUID = 0x14, BLE_GAP_AD_TYPE_RQRD_32_BIT_SVC_UUID = 0x1F, BLE_GAP_AD_TYPE_RQRD_128_BIT_SVC_UUID = 0x15, BLE_GAP_AD_TYPE_SERVICE_16_BIT_DATA = 0x16, BLE_GAP_AD_TYPE_SERVICE_32_BIT_DATA = 0x20, BLE_GAP_AD_TYPE_SERVICE_128_BIT_DATA = 0x21, BLE_GAP_AD_TYPE_PUB_TGT_ADDR = 0x17, BLE_GAP_AD_TYPE_RAND_TGT_ADDR = 0x18, BLE_GAP_AD_TYPE_APPEARANCE = 0x19, BLE_GAP_AD_TYPE_ADV_INTV = 0x1A, BLE_GAP_AD_TYPE_LE_BT_ADDR = 0x1B, BLE_GAP_AD_TYPE_LE_ROLE = 0x1C, BLE_GAP_AD_TYPE_SPAIR_HASH = 0x1D, BLE_GAP_AD_TYPE_SPAIR_RAND = 0x1E, BLE_GAP_AD_TYPE_3D_INFO = 0x3D, BLE_GAP_AD_TYPE_MANU_SPECIFIC_DATA = 0xFF }
	GAP advertising types. More...

enum	ble_gap_adv_flags_t { BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE = 0x01, BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE = 0x02, BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED = 0x04, BLE_GAP_ADV_FLAG_SIMUL_BR_EDR_LE_CONTROLLER = 0x08, BLE_GAP_ADV_FLAG_SIMUL_BR_EDR_LE_HOST = 0x10 }
	AD Type Flag - Bit mask. More...

enum	ble_gap_adv_report_type_t { BLE_GAP_REPORT_TYPE_ADV_EXT = 0, BLE_GAP_REPORT_TYPE_ADV_LEG, BLE_GAP_REPORT_TYPE_SCAN_RSP_EXT, BLE_GAP_REPORT_TYPE_SCAN_RSP_LEG, BLE_GAP_REPORT_TYPE_PER_ADV }
	Advertising report type. More...

enum	ble_gap_adv_report_info_t { BLE_GAP_REPORT_INFO_COMPLETE_BIT = (1 << 0), BLE_GAP_REPORT_INFO_CONN_ADV_BIT = (1 << 1), BLE_GAP_REPORT_INFO_SCAN_ADV_BIT = (1 << 2), BLE_GAP_REPORT_INFO_DIR_ADV_BIT = (1 << 3) }
	Advertising report information. More...

enum	ble_gap_stopped_reason_t { BLE_GAP_STOPPED_REASON_TIMEOUT = 0, BLE_GAP_STOPPED_REASON_ON_USER, BLE_GAP_STOPPED_REASON_CONN_EST }
	Stop reason code. More...

enum	ble_gap_privacy_mode_t { BLE_GAP_PRIVACY_MODE_NETWORK = 0x00, BLE_GAP_PRIVACY_MODE_DEVICE = 0x01 }
	Privacy mode. More...

enum	ble_gap_actv_role_t { BLE_GAP_ACTIVITY_ROLE_ADV = 0, BLE_GAP_ACTIVITY_ROLE_CON = 1, BLE_GAP_ACTIVITY_ROLE_SCAN_INIT = 2, BLE_GAP_ACTIVITY_ROLE_UNKNOWN = 0xf }
	Possible roles of the activity. More...

enum	ble_gap_clk_acc_t { BLE_GAP_CLK_ACC_500 = 0, BLE_GAP_CLK_ACC_250, BLE_GAP_CLK_ACC_150, BLE_GAP_CLK_ACC_100, BLE_GAP_CLK_ACC_75, BLE_GAP_CLK_ACC_50, BLE_GAP_CLK_ACC_30, BLE_GAP_CLK_ACC_20 }
	Clock ACC error. More...

enum	ble_gap_actv_type_t { BLE_GAP_ACTV_TYPE_ADV = 0, BLE_GAP_ACTV_TYPE_SCAN, BLE_GAP_ACTV_TYPE_INIT, BLE_GAP_ACTV_TYPE_PER_SYNC }
	Activity type. More...

enum	ble_gap_rslv_addr_read_op_id_t { BLE_GAP_OPCODE_LOCAL_RSLV_ADDR_READ, BLE_GAP_OPCODE_PEER_RSLV_ADDR_READ }
	Operation code used to read resolvable address. More...

Functions
void	ble_gap_pair_enable (bool enable)
	Decide whether to support the pair feature. More...

uint16_t	ble_gap_addr_set (ble_gap_bdaddr_t const *p_addr)
	Set the device identity address (public or random static). More...

uint16_t	ble_gap_addr_get (ble_gap_bdaddr_t *p_addr)
	Get the device identity address (public or random static). More...

uint16_t	ble_gap_tx_power_set (ble_gap_actv_role_t role, uint8_t index, int8_t txpwr_dbm)
	Set the tx power. More...

uint16_t	ble_gap_tx_power_get (ble_gap_actv_role_t role, uint8_t index, int8_t *txpwr_dbm)
	Get the tx power. More...

uint16_t	ble_gap_irk_set (ble_gap_sec_key_t *p_irk)
	Set IRK used for resolvable random BD address generation (LSB first). More...

uint16_t	ble_gap_privacy_params_set (uint16_t renew_dur, bool enable_flag)
	Set privacy related parameters. More...

uint16_t	ble_gap_data_length_set (uint16_t sugg_max_tx_octet, uint16_t sugg_max_tx_time)
	Set suggested default LE data length. More...

uint16_t	ble_gap_l2cap_params_set (uint16_t max_mtu, uint16_t max_mps, uint8_t max_nb_lecb)
	Set L2CAP related parameters. More...

void	ble_gap_pref_phy_set (uint8_t tx_pref_phy, uint8_t rx_pref_phy)
	Set the preferred values for the transmitter PHY and receiver PHY. More...

uint16_t	ble_gap_path_compensation_set (int16_t tx_path_comp, int16_t rx_path_comp)
	Set the RF path gain or loss between the RF transceiver and the antenna contributed by intermediate components. More...

uint16_t	ble_gap_chnl_map_set (ble_gap_chnl_map_t *p_chnl_map)
	Set advertising channel map before advertising starts. More...

uint16_t	ble_gap_chnl_map_timer_set (bool enable_flag)
	Set ble channel map update timer enable or disable. More...

uint16_t	ble_gap_bond_devs_get (ble_gap_bond_dev_list_t *p_bond_list)
	Get all bonded devices. More...

uint16_t	ble_gap_bond_dev_addr_get (uint8_t conn_idx, ble_gap_bdaddr_t *p_peer_addr)
	Get BD address of the bonded device. More...

uint16_t	ble_gap_bond_devs_clear (void)
	Clear all bonded devices. More...

uint16_t	ble_gap_bond_dev_del (const ble_gap_bdaddr_t *p_peer_addr)
	Delete a bond device with the specified BD address. More...

uint16_t	ble_gap_whitelist_get (ble_gap_white_list_t *p_whitelist)
	Get the content of the whole white list. More...

uint16_t	ble_gap_whitelist_add (const ble_gap_white_list_t *p_whitelist)
	Add the devices into current white list. If white list is full or there are duplicated entries, it will return error. More...

uint16_t	ble_gap_whitelist_del (const ble_gap_white_list_t *p_whitelist)
	Delete the devices out of current white list. If the entries do not exist in the current white list, it will return error. More...

uint16_t	ble_gap_whitelist_clear (void)
	Clear all the entries in the current white list. More...

uint16_t	ble_gap_per_adv_list_get (ble_gap_period_adv_list_t *p_pal_list)
	Get the content of the whole periodic advertising list. More...

uint16_t	ble_gap_per_adv_list_add (const ble_gap_period_adv_list_t *p_pal_list)
	Add the devices into current periodic advertising list. If periodic advertising list is full or there are duplicated entries, it will return error. More...

uint16_t	ble_gap_per_adv_list_del (const ble_gap_period_adv_list_t *p_pal_list)
	Delete the devices out of periodic advertising list. If the entries do not exist in the current list, an error will be returned. More...

uint16_t	ble_gap_per_adv_list_clear (void)
	Clear all the entries in the current periodic advertising list. More...

uint16_t	ble_gap_rpa_list_get (ble_gap_ral_dev_list_t *p_rpa_list)
	Get the RPA list info. More...

uint16_t	ble_gap_dev_info_get (ble_gap_dev_info_get_type_t type)
	Get the device information according to param type. More...

uint16_t	ble_gap_adv_param_set (uint8_t adv_idx, ble_gap_own_addr_t own_addr_type, ble_gap_adv_param_t *p_adv_param)
	Set parameters for advertising. Note that this function must be called prior to advertising started. More...

uint16_t	ble_gap_ext_adv_param_set (uint8_t adv_idx, ble_gap_own_addr_t own_addr_type, ble_gap_ext_adv_param_t *p_adv_param)
	Set extended parameters for advertising. Note that this function must be called prior to advertising. More...

uint16_t	ble_gap_adv_data_set (uint8_t adv_idx, ble_gap_adv_data_type_t type, const uint8_t *p_data, uint16_t length)
	Set Advertising Data, Scan Response Data and Periodic Advertising Data. More...

uint16_t	ble_gap_update_adv_data (uint8_t adv_idx, ble_gap_adv_data_type_t type, const uint8_t *p_data, uint16_t length)
	Update Advertising Data, Scan Response Data and Periodic Advertising Data. More...

uint16_t	ble_gap_adv_start (uint8_t adv_idx, ble_gap_adv_time_param_t *p_timeout)
	Start advertising. More...

uint16_t	ble_gap_adv_stop (uint8_t adv_idx)
	Stop advertising. More...

uint16_t	ble_gap_scan_param_set (ble_gap_own_addr_t own_addr_type, ble_gap_scan_param_t *p_scan_param)
	Set parameters for scanning. Note that this function must be called prior to scanning started. More...

uint16_t	ble_gap_ext_scan_param_set (ble_gap_own_addr_t own_addr_type, ble_gap_ext_scan_param_t *p_scan_param)
	Set extended parameters for scanning. Note that this function must be called prior to scanning started. More...

uint16_t	ble_gap_scan_start (void)
	Start scanning. More...

uint16_t	ble_gap_scan_stop (void)
	Stop scanning. More...

uint16_t	ble_gap_per_sync_param_set (uint8_t per_sync_idx, ble_gap_per_sync_param_t *p_per_sync_param)
	Set the parameters used for periodic sync. More...

uint16_t	ble_gap_per_sync_start (uint8_t per_sync_idx)
	Start to synchronize with periodic advertising from an advertiser and begin receiving periodic advertising packets. More...

uint16_t	ble_gap_per_sync_stop (uint8_t per_sync_idx)
	Stop periodic synchronization. More...

uint16_t	ble_gap_connect (ble_gap_own_addr_t own_addr_type, ble_gap_init_param_t *p_init_param)
	Start a legacy connection to a device. More...

uint16_t	ble_gap_ext_connect (ble_gap_own_addr_t own_addr_type, ble_gap_ext_init_param_t *p_init_param)
	Start an extended connection to a device. More...

uint16_t	ble_gap_connect_cancel (void)
	Cancel an initiated connection. More...

void	ble_gap_appearance_set (uint16_t appearance)
	Set GAP appearance value. More...

uint16_t	ble_gap_appearance_get (uint16_t *p_appearance)
	Get GAP appearance value. More...

void	ble_gap_ppcp_present_set (bool present_flag)
	Set GAP Peripheral Preferred Connection Parameters present flag. More...

uint16_t	ble_gap_ppcp_set (ble_gap_conn_param_t const *p_conn_params)
	Set GAP Peripheral Preferred Connection Parameters. More...

uint16_t	ble_gap_ppcp_get (ble_gap_conn_param_t *p_conn_params)
	Get GAP Peripheral Preferred Connection Parameters. More...

uint16_t	ble_gap_device_name_set (ble_gap_dev_name_write_perm_t write_perm, uint8_t const *p_dev_name, uint16_t length)
	Set GAP device name. More...

uint16_t	ble_gap_device_name_get (uint8_t p_dev_name, uint16_t p_length)
	Get GAP device name. More...

uint16_t	ble_gap_lepsm_register (ble_gap_lepsm_register_t *p_lepsm)
	Register a LE Protocol/Service Multiplexer. More...

uint16_t	ble_gap_lepsm_unregister (uint16_t le_psm)
	Unregister a LE Protocol/Service Multiplexer. More...

uint16_t	ble_gap_privacy_mode_set (ble_gap_bdaddr_t peer_addr, ble_gap_privacy_mode_t mode)
	Set privacy mode for peer device. More...

uint16_t	ble_gap_rslv_addr_read (ble_gap_rslv_addr_read_op_id_t op_code, ble_gap_bdaddr_t peer_iden_addr)
	Read peer or local resolvable address. More...

uint16_t	ble_gap_reslv_rpa_addr (uint8_t *reslv_addr, uint8_t src_info, ble_gap_reslv_rpa_addr_callback_t cb)
	Resolve the rpa address. More...

uint16_t	ble_gap_update_conn_param_method_set (uint8_t conn_idx, bool use_l2cap_flag)
	Set the method for updating connection parameter. More...

void	ble_gap_rpa_addr_report_cb_register (ble_gap_rpa_addr_report_callback_t cb)
	Set the cb for rpa address report. More...

Detailed Description

BLE GAPM API.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of GOODIX nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file ble_gapm.h.

Classes

Macros

Typedefs

Enumerations

Functions

Detailed Description