IRQ Handler and Callbacks functions.
More...
IRQ Handler and Callbacks functions.
◆ hal_aon_wdt_alarm_callback()
AON_WDT count complete (counter reaches to 0) callback.
- Note
- This function should not be modified. When the callback is needed, the hal_wdt_count_cplt_callback can be implemented in the user file.
- Parameters
-
[in] | p_aon_wdt | Pointer to a AON_WDT handle which contains the configuration information for the specified AON_WDT module. |
◆ hal_aon_wdt_irq_handler()
Handle AON_WDT interrupt request.
- Note
- The count completed can be used if specific safety operations or data logging must be performed before the actual reset is generated. When RESET Mode is enabled, AON_WDT will generate an interrupt on first timeout. If interrupt has not been cleared before the second timeout, AON_WDT will then request a SoC Reset.
- Parameters
-
[in] | p_aon_wdt | Pointer to a AON_WDT handle which contains the configuration information for the specified AON_WDT module. |