Enumerations
enum	hal_i2c_state_t { HAL_I2C_STATE_RESET = 0x00U, HAL_I2C_STATE_READY = 0x20U, HAL_I2C_STATE_BUSY = 0x24U, HAL_I2C_STATE_BUSY_TX = 0x21U, HAL_I2C_STATE_BUSY_RX = 0x22U, HAL_I2C_STATE_LISTEN = 0x28U, HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, HAL_I2C_STATE_ABORT = 0x60U, HAL_I2C_STATE_TIMEOUT = 0xA0U, HAL_I2C_STATE_ERROR = 0xE0U }
	HAL I2C State Enumerations definition. More...

Detailed Description

Enumeration Type Documentation

◆ hal_i2c_state_t

enum hal_i2c_state_t

HAL I2C State Enumerations definition.

Note

HAL I2C State value coding follow below described bitmap :

  b7-b6  Error information
      00 : No Error
      01 : Abort (Abort user request on going)
      10 : Timeout
      11 : Error
  b5     IP initilisation status
      0  : Reset (IP not initialized)
      1  : init done (IP initialized and ready to use. HAL I2C init function called)
  b4     (not used)
      x  : Should be set to 0
  b3
      0  : Ready or Busy (No Listen mode ongoing)
      1  : Listen (IP in Address Listen Mode)
  b2     Intrinsic process state
      0  : Ready
      1  : Busy (IP busy with some configuration or internal operations)
  b1     Rx state
      0  : Ready (no Rx operation ongoing)
      1  : Busy (Rx operation ongoing)
  b0     Tx state
      0  : Ready (no Tx operation ongoing)
      1  : Busy (Tx operation ongoing)
*

Enumerator
HAL_I2C_STATE_RESET	Peripheral is not yet Initialized
HAL_I2C_STATE_READY	Peripheral Initialized and ready for use
HAL_I2C_STATE_BUSY	An internal process is ongoing
HAL_I2C_STATE_BUSY_TX	Data Transmission process is ongoing
HAL_I2C_STATE_BUSY_RX	Data Reception process is ongoing
HAL_I2C_STATE_LISTEN	Address Listen Mode is ongoing
HAL_I2C_STATE_BUSY_TX_LISTEN	Address Listen Mode and Data Transmission process is ongoing
HAL_I2C_STATE_BUSY_RX_LISTEN	Address Listen Mode and Data Reception process is ongoing
HAL_I2C_STATE_ABORT	Abort user request ongoing
HAL_I2C_STATE_TIMEOUT	Timeout state
HAL_I2C_STATE_ERROR	Error