Functions | |
uint16_t | app_spi_init (app_spi_params_t *p_params, app_spi_evt_handler_t evt_handler) |
Initialize the APP SPI DRIVER according to the specified parameters in the app_spi_params_t and app_spi_evt_handler_t. More... | |
uint16_t | app_spi_deinit (app_spi_id_t id) |
De-initialize the APP SPI DRIVER peripheral. More... | |
uint16_t | app_spi_abort (app_spi_id_t id) |
Abort spi communication with Interrupt. More... | |
uint16_t | app_spim_transmit_with_ia (app_spi_id_t id, uint8_t instruction, uint32_t address, uint8_t *p_data, uint16_t data_length) |
SPI master transmit with 1-byte inst and 3-byte addr, can use to write flash/display/eeprom, etc. More... | |
uint16_t | app_spim_receive_with_ia (app_spi_id_t id, uint8_t instruction, uint32_t address, uint8_t dummy_bytes, uint8_t *p_data, uint16_t data_length) |
SPI master receive with 1-byte inst and 3-byte addr and 0~4 dummy Byte, can use to read flash/display/eeprom, etc. More... | |
uint16_t | app_spi_receive_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size, uint32_t timeout) |
Receive in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_receive_async (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
Receive in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_transmit_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size, uint32_t timeout) |
Transmits in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_transmit_async (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
Transmits in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_transmit_receive_sync (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t size, uint32_t timeout) |
Transmits and receive in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_transmit_receive_async (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t size) |
Transmits and receive in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_read_eeprom_sync (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t tx_size, uint32_t rx_size, uint32_t timeout) |
Read an amount of data from EEPROM in blocking mode. More... | |
uint16_t | app_spi_read_eeprom_async (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t tx_size, uint32_t rx_size) |
Read an amount of data from EEPROM in non-blocking mode with Interrupt. More... | |
spi_handle_t * | app_spi_get_handle (app_spi_id_t id) |
Return the SPI handle. More... | |
uint16_t | app_spi_write_memory_async (app_spi_id_t id, uint8_t *p_cmd_data, uint8_t *p_tx_data, uint32_t cmd_size, uint32_t tx_size) |
Transmits in master or slave mode an amount of data in non-blocking mode with DMA. More... | |
uint16_t | app_spi_read_memory_async (app_spi_id_t id, uint8_t *p_cmd_data, uint8_t *p_rx_data, uint32_t cmd_size, uint32_t rx_size) |
Read an amount of data from EEPROM in non-blocking mode with DMA. More... | |
uint16_t | app_spi_receive_high_speed_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
[High speed] Receive in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_transmit_high_speed_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
[High speed] Transmit in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_dma_init (app_spi_params_t *p_params) |
Initialize the APP SPI DRIVER according to the specified parameters in the app_spi_params_t and app_spi_evt_handler_t. More... | |
uint16_t | app_spi_dma_deinit (app_spi_id_t id) |
De-initialize the APP SPI DRIVER peripheral. More... | |
uint16_t | app_spim_dma_transmit_with_ia (app_spi_id_t id, uint8_t instruction, uint32_t address, uint8_t *p_data, uint16_t data_length) |
SPI master transmit with 1-byte inst and 3-byte addr, can use to write flash/display/eeprom, etc. More... | |
uint16_t | app_spim_dma_receive_with_ia (app_spi_id_t id, uint8_t instruction, uint32_t address, uint8_t dummy_bytes, uint8_t *p_data, uint16_t data_length) |
SPI master receive with 1-byte inst and 3-byte addr and 0~4 dummy Byte, can use to read flash/display/eeprom, etc. More... | |
uint16_t | app_spi_dma_receive_async (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
Receive in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_dma_transmit_async (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
Transmits in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_dma_transmit_receive_async (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t size) |
Transmits and receive in master or slave mode an amount of data in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_dma_read_eeprom_async (app_spi_id_t id, uint8_t *p_tx_data, uint8_t *p_rx_data, uint32_t tx_size, uint32_t rx_size) |
Read an amount of data from EEPROM in non-blocking mode with Interrupt. More... | |
uint16_t | app_spi_dma_write_memory_async (app_spi_id_t id, uint8_t *p_cmd_data, uint8_t *p_tx_data, uint32_t cmd_size, uint32_t tx_size) |
Transmits in master or slave mode an amount of data in non-blocking mode with DMA. More... | |
uint16_t | app_spi_dma_read_memory_async (app_spi_id_t id, uint8_t *p_cmd_data, uint8_t *p_rx_data, uint32_t cmd_size, uint32_t rx_size) |
Read an amount of data from EEPROM in non-blocking mode with DMA. More... | |
uint16_t | app_spi_dma_receive_high_speed_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
[High speed] Receive in master or slave mode an amount of data in blocking mode. More... | |
uint16_t | app_spi_dma_transmit_high_speed_sync (app_spi_id_t id, uint8_t *p_data, uint16_t size) |
[High speed] Transmit in master or slave mode an amount of data in blocking mode. More... | |
uint16_t app_spi_abort | ( | app_spi_id_t | id | ) |
Abort spi communication with Interrupt.
[in] | id | SPI module ID. |
uint16_t app_spi_deinit | ( | app_spi_id_t | id | ) |
De-initialize the APP SPI DRIVER peripheral.
[in] | id | De-initialize for a specific ID. |
uint16_t app_spi_dma_deinit | ( | app_spi_id_t | id | ) |
De-initialize the APP SPI DRIVER peripheral.
[in] | id | De-initialize for a specific ID. |
uint16_t app_spi_dma_init | ( | app_spi_params_t * | p_params | ) |
Initialize the APP SPI DRIVER according to the specified parameters in the app_spi_params_t and app_spi_evt_handler_t.
[in] | p_params | Pointer to app_spi_params_t parameter which contains the configuration information for the specified SPI module. |
uint16_t app_spi_dma_read_eeprom_async | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | tx_size, | ||
uint32_t | rx_size | ||
) |
Read an amount of data from EEPROM in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to transmission data buffer |
[out] | p_rx_data | Pointer to reception data buffer |
[in] | tx_size | Amount of data to be sent in bytes |
[in] | rx_size | Amount of data to be received in bytes |
uint16_t app_spi_dma_read_memory_async | ( | app_spi_id_t | id, |
uint8_t * | p_cmd_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | cmd_size, | ||
uint32_t | rx_size | ||
) |
Read an amount of data from EEPROM in non-blocking mode with DMA.
[in] | id | which SPI module want to transmit. |
[in] | p_cmd_data | Pointer to command data buffer |
[out] | p_rx_data | Pointer to reception data buffer |
[in] | cmd_size | Amount of command data to be sent in bytes |
[in] | rx_size | Amount of data to be received in bytes |
uint16_t app_spi_dma_receive_async | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
Receive in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_dma_receive_high_speed_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
[High speed] Receive in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_dma_transmit_async | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
Transmits in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_dma_transmit_high_speed_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
[High speed] Transmit in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_dma_transmit_receive_async | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | size | ||
) |
Transmits and receive in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to tx data buffer |
[in] | p_rx_data | Pointer to rx data buffer |
[in] | size | Amount of data to be sent and receive |
uint16_t app_spi_dma_write_memory_async | ( | app_spi_id_t | id, |
uint8_t * | p_cmd_data, | ||
uint8_t * | p_tx_data, | ||
uint32_t | cmd_size, | ||
uint32_t | tx_size | ||
) |
Transmits in master or slave mode an amount of data in non-blocking mode with DMA.
[in] | id | which SPI module want to transmit. |
[in] | p_cmd_data | Pointer to command data buffer |
[in] | p_tx_data | Pointer to transmission data buffer |
[in] | cmd_size | Amount of command data to be sent in bytes |
[in] | tx_size | Amount of data to be sent in bytes |
spi_handle_t* app_spi_get_handle | ( | app_spi_id_t | id | ) |
Return the SPI handle.
[in] | id | SPI Channel ID. |
uint16_t app_spi_init | ( | app_spi_params_t * | p_params, |
app_spi_evt_handler_t | evt_handler | ||
) |
Initialize the APP SPI DRIVER according to the specified parameters in the app_spi_params_t and app_spi_evt_handler_t.
[in] | p_params | Pointer to app_spi_params_t parameter which contains the configuration information for the specified SPI module. |
[in] | evt_handler | SPI user callback function. |
uint16_t app_spi_read_eeprom_async | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | tx_size, | ||
uint32_t | rx_size | ||
) |
Read an amount of data from EEPROM in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to transmission data buffer |
[out] | p_rx_data | Pointer to reception data buffer |
[in] | tx_size | Amount of data to be sent in bytes |
[in] | rx_size | Amount of data to be received in bytes |
uint16_t app_spi_read_eeprom_sync | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | tx_size, | ||
uint32_t | rx_size, | ||
uint32_t | timeout | ||
) |
Read an amount of data from EEPROM in blocking mode.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to transmission data buffer |
[out] | p_rx_data | Pointer to reception data buffer |
[in] | tx_size | Amount of data to be sent in bytes |
[in] | rx_size | Amount of data to be received in bytes |
[in] | timeout | Timeout duration |
uint16_t app_spi_read_memory_async | ( | app_spi_id_t | id, |
uint8_t * | p_cmd_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | cmd_size, | ||
uint32_t | rx_size | ||
) |
Read an amount of data from EEPROM in non-blocking mode with DMA.
[in] | id | which SPI module want to transmit. |
[in] | p_cmd_data | Pointer to command data buffer |
[out] | p_rx_data | Pointer to reception data buffer |
[in] | cmd_size | Amount of command data to be sent in bytes |
[in] | rx_size | Amount of data to be received in bytes |
uint16_t app_spi_receive_async | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
Receive in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_receive_high_speed_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
[High speed] Receive in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_receive_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size, | ||
uint32_t | timeout | ||
) |
Receive in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
[in] | timeout | Timeout duration |
uint16_t app_spi_transmit_async | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
Transmits in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_transmit_high_speed_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size | ||
) |
[High speed] Transmit in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to receive. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
uint16_t app_spi_transmit_receive_async | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | size | ||
) |
Transmits and receive in master or slave mode an amount of data in non-blocking mode with Interrupt.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to tx data buffer |
[in] | p_rx_data | Pointer to rx data buffer |
[in] | size | Amount of data to be sent and receive |
uint16_t app_spi_transmit_receive_sync | ( | app_spi_id_t | id, |
uint8_t * | p_tx_data, | ||
uint8_t * | p_rx_data, | ||
uint32_t | size, | ||
uint32_t | timeout | ||
) |
Transmits and receive in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to transmit. |
[in] | p_tx_data | Pointer to tx data buffer |
[in] | p_rx_data | Pointer to rx data buffer |
[in] | size | Amount of data to be sent and receive |
[in] | timeout | Timeout duration |
uint16_t app_spi_transmit_sync | ( | app_spi_id_t | id, |
uint8_t * | p_data, | ||
uint16_t | size, | ||
uint32_t | timeout | ||
) |
Transmits in master or slave mode an amount of data in blocking mode.
[in] | id | which SPI module want to transmit. |
[in] | p_data | Pointer to data buffer |
[in] | size | Amount of data to be sent |
[in] | timeout | Timeout duration |
uint16_t app_spi_write_memory_async | ( | app_spi_id_t | id, |
uint8_t * | p_cmd_data, | ||
uint8_t * | p_tx_data, | ||
uint32_t | cmd_size, | ||
uint32_t | tx_size | ||
) |
Transmits in master or slave mode an amount of data in non-blocking mode with DMA.
[in] | id | which SPI module want to transmit. |
[in] | p_cmd_data | Pointer to command data buffer |
[in] | p_tx_data | Pointer to transmission data buffer |
[in] | cmd_size | Amount of command data to be sent in bytes |
[in] | tx_size | Amount of data to be sent in bytes |
uint16_t app_spim_dma_receive_with_ia | ( | app_spi_id_t | id, |
uint8_t | instruction, | ||
uint32_t | address, | ||
uint8_t | dummy_bytes, | ||
uint8_t * | p_data, | ||
uint16_t | data_length | ||
) |
SPI master receive with 1-byte inst and 3-byte addr and 0~4 dummy Byte, can use to read flash/display/eeprom, etc.
[in] | id | : just support APP_SPI_ID_MASTER |
[in] | instruction | : 1-byte instruction phase |
[in] | address | : 3-byte address phase |
[in] | dummy_bytes | : dummy bytes, 0 ~ 4 |
[in] | p_data | : pointer to transmit buffer |
[in] | data_length | : length of buffer, unit in byte |
uint16_t app_spim_dma_transmit_with_ia | ( | app_spi_id_t | id, |
uint8_t | instruction, | ||
uint32_t | address, | ||
uint8_t * | p_data, | ||
uint16_t | data_length | ||
) |
SPI master transmit with 1-byte inst and 3-byte addr, can use to write flash/display/eeprom, etc.
[in] | id | : just support APP_SPI_ID_MASTER |
[in] | instruction | : 1-byte instruction phase |
[in] | address | : 3-byte address phase |
[in] | p_data | : pointer to transmit buffer |
[in] | data_length | : length of buffer, unit in byte |
uint16_t app_spim_receive_with_ia | ( | app_spi_id_t | id, |
uint8_t | instruction, | ||
uint32_t | address, | ||
uint8_t | dummy_bytes, | ||
uint8_t * | p_data, | ||
uint16_t | data_length | ||
) |
SPI master receive with 1-byte inst and 3-byte addr and 0~4 dummy Byte, can use to read flash/display/eeprom, etc.
[in] | id | : just support APP_SPI_ID_MASTER |
[in] | instruction | : 1-byte instruction phase |
[in] | address | : 3-byte address phase |
[in] | dummy_bytes | : dummy bytes, 0 ~ 4 |
[in] | p_data | : pointer to transmit buffer |
[in] | data_length | : length of buffer, unit in byte |
uint16_t app_spim_transmit_with_ia | ( | app_spi_id_t | id, |
uint8_t | instruction, | ||
uint32_t | address, | ||
uint8_t * | p_data, | ||
uint16_t | data_length | ||
) |
SPI master transmit with 1-byte inst and 3-byte addr, can use to write flash/display/eeprom, etc.
[in] | id | : just support APP_SPI_ID_MASTER |
[in] | instruction | : 1-byte instruction phase |
[in] | address | : 3-byte address phase |
[in] | p_data | : pointer to transmit buffer |
[in] | data_length | : length of buffer, unit in byte |