Collaboration diagram for BLE Stack specific error codes:Macros | |
| #define | BLE_SUCCESS 0x00 |
| Operation is Successful. More... | |
| #define | BLE_ATT_ERR_INVALID_HANDLE 0x01 |
| ATT Specific Error. More... | |
| #define | BLE_ATT_ERR_READ_NOT_PERMITTED 0x02 |
| The attribute cannot be read. More... | |
| #define | BLE_ATT_ERR_WRITE_NOT_PERMITTED 0x03 |
| The attribute cannot be written. More... | |
| #define | BLE_ATT_ERR_INVALID_PDU 0x04 |
| The attribute PDU was invalid. More... | |
| #define | BLE_ATT_ERR_INSUFF_AUTHEN 0x05 |
| The attribute requires authentication before it can be read or written. More... | |
| #define | BLE_ATT_ERR_REQUEST_NOT_SUPPORTED 0x06 |
| Attribute server does not support the request received from the client. More... | |
| #define | BLE_ATT_ERR_INVALID_OFFSET 0x07 |
| Offset specified was past the end of the attribute. More... | |
| #define | BLE_ATT_ERR_INSUFF_AUTHOR 0x08 |
| The attribute requires authorization before it can be read or written. More... | |
| #define | BLE_ATT_ERR_PREPARE_QUEUE_FULL 0x09 |
| Too many prepare writes have been queued. More... | |
| #define | BLE_ATT_ERR_ATTRIBUTE_NOT_FOUND 0x0A |
| No attribute found within the given attribute handle range. More... | |
| #define | BLE_ATT_ERR_ATTRIBUTE_NOT_LONG 0x0B |
| The attribute cannot be read using the Read Blob Request. More... | |
| #define | BLE_ATT_ERR_INSUFF_ENC_KEY_SIZE 0x0C |
| The Encryption Key Size used for encrypting this link is insufficient. More... | |
| #define | BLE_ATT_ERR_INVALID_ATTRIBUTE_VAL_LEN 0x0D |
| The attribute value length is invalid for the operation. More... | |
| #define | BLE_ATT_ERR_UNLIKELY_ERR 0x0E |
| The attribute request has encountered an unlikely error, so the request could not be completed as requested. More... | |
| #define | BLE_ATT_ERR_INSUFF_ENC 0x0F |
| The attribute requires encryption before it can be read or written. More... | |
| #define | BLE_ATT_ERR_UNSUPP_GRP_TYPE 0x10 |
| The attribute type is not a supported grouping attribute as defined by a higher layer specification. More... | |
| #define | BLE_ATT_ERR_INSUFF_RESOURCE 0x11 |
| Insufficient resources to complete the request. More... | |
| #define | BLE_ATT_ERR_DB_OUT_OF_SYNC 0x12 |
| The server requests the client to rediscover the database. More... | |
| #define | BLE_ATT_ERR_VALUE_NOT_ALLOWED 0x13 |
| The attribute parameter value was not allowed. More... | |
| #define | BLE_L2C_ENH_CB_RECONFIG_INVALID_MTU 0x2C |
| L2CAP Specific Error. More... | |
| #define | BLE_L2C_ENH_CB_RECONFIG_INVALID_MPS 0x2D |
| Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time. More... | |
| #define | BLE_L2C_ENH_CB_RECONFIG_INVALID_CID 0x2E |
| Reconfiguration failed - one or more Destination CIDs invalid. More... | |
| #define | BLE_L2C_ENH_CB_RECONFIG_UNACCEPT_PARAM 0x2F |
| Reconfiguration failed - other unacceptable parameters. More... | |
| #define | BLE_L2C_ERR_CONNECTION_LOST 0x30 |
| Message cannot be sent because connection is lost (disconnected). More... | |
| #define | BLE_L2C_ERR_INVALID_MTU_EXCEED 0x31 |
| Invalid PDU length exceeds MTU. More... | |
| #define | BLE_L2C_ERR_INVALID_MPS_EXCEED 0x32 |
| Invalid PDU length exceeds MPS. More... | |
| #define | BLE_L2C_ERR_INVALID_CID 0x33 |
| Invalid Channel ID. More... | |
| #define | BLE_L2C_ERR_INVALID_PDU 0x34 |
| Invalid PDU. More... | |
| #define | BLE_L2C_ERR_NO_RES_AVAIL 0x35 |
| Connection refused because no resources are available. More... | |
| #define | BLE_L2C_ERR_INSUFF_AUTHEN 0x36 |
| Connection refused because of insufficient authentication. More... | |
| #define | BLE_L2C_ERR_INSUFF_AUTHOR 0x37 |
| Connection refused because of insufficient authorization. More... | |
| #define | BLE_L2C_ERR_INSUFF_ENC_KEY_SIZE 0x38 |
| Connection refused because of insufficient encryption key size. More... | |
| #define | BLE_L2C_ERR_INSUFF_ENC 0x39 |
| Connection refused because of insufficient encryption. More... | |
| #define | BLE_L2C_ERR_LEPSM_NOT_SUPP 0x3A |
| Connection refused because LE_PSM is not supported. More... | |
| #define | BLE_L2C_ERR_INSUFF_CREDIT 0x3B |
| No more credit. More... | |
| #define | BLE_L2C_ERR_NOT_UNDERSTOOD 0x3C |
| Command not understood by peer device. More... | |
| #define | BLE_L2C_ERR_CREDIT_ERROR 0x3D |
| Credit error: invalid number of credit received. More... | |
| #define | BLE_L2C_ERR_CID_ALREADY_ALLOC 0x3E |
| Channel identifier already allocated. More... | |
| #define | BLE_L2C_ERR_UNKNOWN_PDU 0x3F |
| Unknown pdu. More... | |
| #define | BLE_GAP_ERR_INVALID_PARAM 0x40 |
| GAP Specific Error. More... | |
| #define | BLE_GAP_ERR_PROTOCOL_PROBLEM 0x41 |
| Problem with protocol exchange, resulting in unexpected responses. More... | |
| #define | BLE_GAP_ERR_NOT_SUPPORTED 0x42 |
| Request not supported by software configuration. More... | |
| #define | BLE_GAP_ERR_COMMAND_DISALLOWED 0x43 |
| Request not allowed in current state. More... | |
| #define | BLE_GAP_ERR_CANCELED 0x44 |
| Requested operation canceled. More... | |
| #define | BLE_GAP_ERR_TIMEOUT 0x45 |
| Requested operation timeout. More... | |
| #define | BLE_GAP_ERR_DISCONNECTED 0x46 |
| Link connection is lost during operation. More... | |
| #define | BLE_GAP_ERR_NOT_FOUND 0x47 |
| Search algorithm finished, but no result found. More... | |
| #define | BLE_GAP_ERR_REJECTED 0x48 |
| Request rejected by peer device. More... | |
| #define | BLE_GAP_ERR_PRIVACY_CFG_PB 0x49 |
| Problem with privacy configuration. More... | |
| #define | BLE_GAP_ERR_ADV_DATA_INVALID 0x4A |
| Duplicate or invalid advertising data. More... | |
| #define | BLE_GAP_ERR_INSUFF_RESOURCES 0x4B |
| Insufficient resources. More... | |
| #define | BLE_GAP_ERR_UNEXPECTED 0x4C |
| Unexpected error. More... | |
| #define | BLE_GAP_ERR_MISMATCH 0x4D |
| Feature mismatch. More... | |
| #define | BLE_GATT_ERR_INVALID_ATT_LEN 0x50 |
| GATT Specific Error. More... | |
| #define | BLE_GATT_ERR_INVALID_TYPE_IN_SVC_SEARCH 0x51 |
| Error in service search. More... | |
| #define | BLE_GATT_ERR_WRITE 0x52 |
| Invalid write data. More... | |
| #define | BLE_GATT_ERR_SIGNED_WRITE 0x53 |
| Signed write error. More... | |
| #define | BLE_GATT_ERR_ATTRIBUTE_CLIENT_MISSING 0x54 |
| No attribute client defined. More... | |
| #define | BLE_GATT_ERR_ATTRIBUTE_SERVER_MISSING 0x55 |
| No attribute server defined. More... | |
| #define | BLE_GATT_ERR_INVALID_PERM 0x56 |
| Permission set in service/attribute is invalid. More... | |
| #define | BLE_GATT_ERR_BROWSE_NO_ANY_MORE 0x57 |
| GATT browses no any more contents. More... | |
| #define | BLE_GATT_ERR_CACHE_UPDATING 0x58 |
| GATT Cache in updating process. More... | |
| #define | BLE_GATT_ERR_CACHE_FINISH 0x59 |
| GATT Cache is updated or checked. More... | |
| #define | BLE_SEC_ERR_PASSKEY_ENTRY_FAIL 0x61 |
| SEC Specific Error. More... | |
| #define | BLE_SEC_ERR_OOB_NOT_AVAILBL 0x62 |
| The OOB data is not available. More... | |
| #define | BLE_SEC_ERR_AUTH_REQ 0x63 |
| The pairing procedure cannot be performed as authentication requirements cannot be met due to IO incapability of one or both devices. More... | |
| #define | BLE_SEC_ERR_CONFIRM_VAL_FAIL 0x64 |
| The confirm value does not match the calculated compare value. More... | |
| #define | BLE_SEC_ERR_PAIRING_NOT_SUPPORT 0x65 |
| Pairing is not supported by the device. More... | |
| #define | BLE_SEC_ERR_ENCRPT_KEY_SIZE 0x66 |
| The resultant encryption key size is insufficient for the security requirements of this device. More... | |
| #define | BLE_SEC_ERR_COMMAND_NOT_SUPPORT 0x67 |
| The SMP command received is not supported on this device. More... | |
| #define | BLE_SEC_ERR_UNSPECIFIED 0x68 |
| Pairing failed due to an unspecified reason. More... | |
| #define | BLE_SEC_ERR_REPEAT_ATTEMPT 0x69 |
| Pairing or authentication procedure is disallowed because too little time has elapsed since last pairing request or security request. More... | |
| #define | BLE_SEC_ERR_INVALID_PARAM 0x6A |
| The Invalid Parameters error code indicates that the command length is invalid or that a parameter is outside of the specified range. More... | |
| #define | BLE_SEC_ERR_DHKEY_CHECK_FAIL 0x6B |
| Indicate to the remote device that the DHKey Check value received doesn't match the one calculated by the local device. More... | |
| #define | BLE_SEC_ERR_NUM_CMP_FAIL 0x6C |
| Indicate that the confirm values in the numeric comparison protocol do not match. More... | |
| #define | BLE_SEC_ERR_BR_EDR_IN_PROGRESS 0x6D |
| Indicate that the pairing over the LE transport failed due to a Pairing Request sent over the BR/EDR transport in process. More... | |
| #define | BLE_SEC_ERR_KEY_DRIV_GEN_NOT_ALLOW 0x6E |
| Indicate that the BR/EDR Link Key generated on the BR/EDR transport cannot be used to derive and distribute keys for the LE transport. More... | |
| #define | BLE_SEC_ERR_LTK_MISSING 0x6F |
| Indicate the LTK of peer devices missing. More... | |
| #define | BLE_LL_ERR_UNKNOWN_HCI_COMMAND 0x91 |
| LL Specific Error. More... | |
| #define | BLE_LL_ERR_UNKNOWN_CONNECTION_ID 0x92 |
| Unknown Connection Identifier. More... | |
| #define | BLE_LL_ERR_HARDWARE_FAILURE 0x93 |
| Hardware Failure. More... | |
| #define | BLE_LL_ERR_PAGE_TIMEOUT 0x94 |
| BT Page Timeout. More... | |
| #define | BLE_LL_ERR_AUTH_FAILURE 0x95 |
| Authentication failure. More... | |
| #define | BLE_LL_ERR_PIN_MISSING 0x96 |
| Pin code missing. More... | |
| #define | BLE_LL_ERR_MEMORY_CAPA_EXCEED 0x97 |
| Memory capacity exceeded. More... | |
| #define | BLE_LL_ERR_CON_TIMEOUT 0x98 |
| Connection Timeout. More... | |
| #define | BLE_LL_ERR_CON_LIMIT_EXCEED 0x99 |
| Connection limit Exceed. More... | |
| #define | BLE_LL_ERR_SYNC_CON_LIMIT_DEV_EXCEED 0x9A |
| Synchronous Connection limit exceeded. More... | |
| #define | BLE_LL_ERR_ACL_CON_EXISTS 0x9B |
| ACL Connection exits. More... | |
| #define | BLE_LL_ERR_COMMAND_DISALLOWED 0x9C |
| Command Disallowed. More... | |
| #define | BLE_LL_ERR_CONN_REJ_LIMITED_RESOURCES 0x9D |
| Connection rejected due to limited resources. More... | |
| #define | BLE_LL_ERR_CONN_REJ_SECURITY_REASONS 0x9E |
| Connection rejected due to insecurity issues. More... | |
| #define | BLE_LL_ERR_CONN_REJ_UNACCEPTABLE_BDADDR 0x9F |
| Connection rejected due to unacceptable BD Addr. More... | |
| #define | BLE_LL_ERR_CONN_ACCEPT_TIMEOUT_EXCEED 0xA0 |
| Connection rejected due to Accept connection timeout. More... | |
| #define | BLE_LL_ERR_UNSUPPORTED 0xA1 |
| Not Supported. More... | |
| #define | BLE_LL_ERR_INVALID_HCI_PARAM 0xA2 |
| Invalid parameters. More... | |
| #define | BLE_LL_ERR_REMOTE_USER_TERM_CON 0xA3 |
| Remote user terminates connection. More... | |
| #define | BLE_LL_ERR_REMOTE_DEV_TERM_LOW_RESOURCES 0xA4 |
| Remote device loses connection due to low resources. More... | |
| #define | BLE_LL_ERR_REMOTE_DEV_POWER_OFF 0xA5 |
| Remote device loses connection due to power failure. More... | |
| #define | BLE_LL_ERR_CON_TERM_BY_LOCAL_HOST 0xA6 |
| Connection terminated by local host. More... | |
| #define | BLE_LL_ERR_REPEATED_ATTEMPTS 0xA7 |
| Repeated attempts. More... | |
| #define | BLE_LL_ERR_PAIRING_NOT_ALLOWED 0xA8 |
| Pairing not allowed. More... | |
| #define | BLE_LL_ERR_UNKNOWN_LMP_PDU 0xA9 |
| Unknown PDU Error. More... | |
| #define | BLE_LL_ERR_UNSUPPORTED_REMOTE_FEATURE 0xAA |
| Unsupported remote feature. More... | |
| #define | BLE_LL_ERR_SCO_OFFSET_REJECTED 0xAB |
| SCO Offset rejected. More... | |
| #define | BLE_LL_ERR_SCO_INTERVAL_REJECTED 0xAC |
| SCO Interval Rejected. More... | |
| #define | BLE_LL_ERR_SCO_AIR_MODE_REJECTED 0xAD |
| SCO air mode Rejected. More... | |
| #define | BLE_LL_ERR_INVALID_LMP_PARAM 0xAE |
| Invalid LMP parameters. More... | |
| #define | BLE_LL_ERR_UNSPECIFIED_ERROR 0xAF |
| Unspecified error. More... | |
| #define | BLE_LL_ERR_UNSUPPORTED_LMP_PARAM_VALUE 0xB0 |
| Unsupported LMP Parameter value. More... | |
| #define | BLE_LL_ERR_ROLE_CHANGE_NOT_ALLOWED 0xB1 |
| Role Change not allowed. More... | |
| #define | BLE_LL_ERR_LMP_RSP_TIMEOUT 0xB2 |
| LMP Response timeout. More... | |
| #define | BLE_LL_ERR_LMP_COLLISION 0xB3 |
| LMP Collision. More... | |
| #define | BLE_LL_ERR_LMP_PDU_NOT_ALLOWED 0xB4 |
| LMP PDU not allowed. More... | |
| #define | BLE_LL_ERR_ENC_MODE_NOT_ACCEPT 0xB5 |
| Encryption mode not accepted. More... | |
| #define | BLE_LL_ERR_LINK_KEY_CANT_CHANGE 0xB6 |
| Link Key cannot be changed. More... | |
| #define | BLE_LL_ERR_QOS_NOT_SUPPORTED 0xB7 |
| Quality of Service not supported. More... | |
| #define | BLE_LL_ERR_INSTANT_PASSED 0xB8 |
| Error, instant passed. More... | |
| #define | BLE_LL_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUP 0xB9 |
| Pairing with unit key not supported. More... | |
| #define | BLE_LL_ERR_DIFF_TRANSACTION_COLLISION 0xBA |
| Transaction collision. More... | |
| #define | BLE_LL_ERR_QOS_UNACCEPTABLE_PARAM 0xBC |
| Quality of Service not supported. More... | |
| #define | BLE_LL_ERR_QOS_REJECTED 0xBD |
| Quality of Service rejected. More... | |
| #define | BLE_LL_ERR_CHANNEL_CLASS_NOT_SUP 0xBE |
| Channel class not supported. More... | |
| #define | BLE_LL_ERR_INSUFFICIENT_SECURITY 0xBF |
| Insufficient security. More... | |
| #define | BLE_LL_ERR_PARAM_OUT_OF_MAND_RANGE 0xC0 |
| Parameters out of mandatory range. More... | |
| #define | BLE_LL_ERR_ROLE_SWITCH_PEND 0xC2 |
| Role switch pending. More... | |
| #define | BLE_LL_ERR_RESERVED_SLOT_VIOLATION 0xC4 |
| Reserved slot violation. More... | |
| #define | BLE_LL_ERR_ROLE_SWITCH_FAIL 0xC5 |
| Role Switch failed. More... | |
| #define | BLE_LL_ERR_EIR_TOO_LARGE 0xC6 |
| Error: EIR too large. More... | |
| #define | BLE_LL_ERR_SP_NOT_SUPPORTED_HOST 0xC7 |
| Simple pairing not supported by host. More... | |
| #define | BLE_LL_ERR_HOST_BUSY_PAIRING 0xC8 |
| Host pairing is busy. More... | |
| #define | BLE_LL_ERR_CONTROLLER_BUSY 0xCA |
| Controller is busy. More... | |
| #define | BLE_LL_ERR_UNACCEPTABLE_CONN_INT 0xCB |
| Unacceptable connection initialization. More... | |
| #define | BLE_LL_ERR_ADV_TO 0xCC |
| Advertising Timeout. More... | |
| #define | BLE_LL_ERR_TERMINATED_MIC_FAILURE 0xCD |
| Connection Terminated due to a MIC failure. More... | |
| #define | BLE_LL_ERR_CONN_FAILED_TO_BE_EST 0xCE |
| Connection failed to be established. More... | |
| #define BLE_ATT_ERR_ATTRIBUTE_NOT_FOUND 0x0A |
No attribute found within the given attribute handle range.
Definition at line 127 of file ble_error.h.
| #define BLE_ATT_ERR_ATTRIBUTE_NOT_LONG 0x0B |
The attribute cannot be read using the Read Blob Request.
Definition at line 128 of file ble_error.h.
| #define BLE_ATT_ERR_DB_OUT_OF_SYNC 0x12 |
The server requests the client to rediscover the database.
Definition at line 135 of file ble_error.h.
| #define BLE_ATT_ERR_INSUFF_AUTHEN 0x05 |
The attribute requires authentication before it can be read or written.
Definition at line 122 of file ble_error.h.
| #define BLE_ATT_ERR_INSUFF_AUTHOR 0x08 |
The attribute requires authorization before it can be read or written.
Definition at line 125 of file ble_error.h.
| #define BLE_ATT_ERR_INSUFF_ENC 0x0F |
The attribute requires encryption before it can be read or written.
Definition at line 132 of file ble_error.h.
| #define BLE_ATT_ERR_INSUFF_ENC_KEY_SIZE 0x0C |
The Encryption Key Size used for encrypting this link is insufficient.
Definition at line 129 of file ble_error.h.
| #define BLE_ATT_ERR_INSUFF_RESOURCE 0x11 |
Insufficient resources to complete the request.
Definition at line 134 of file ble_error.h.
| #define BLE_ATT_ERR_INVALID_ATTRIBUTE_VAL_LEN 0x0D |
The attribute value length is invalid for the operation.
Definition at line 130 of file ble_error.h.
| #define BLE_ATT_ERR_INVALID_HANDLE 0x01 |
ATT Specific Error.
The given attribute handle was not valid on this server.
Definition at line 118 of file ble_error.h.
| #define BLE_ATT_ERR_INVALID_OFFSET 0x07 |
Offset specified was past the end of the attribute.
Definition at line 124 of file ble_error.h.
| #define BLE_ATT_ERR_INVALID_PDU 0x04 |
The attribute PDU was invalid.
Definition at line 121 of file ble_error.h.
| #define BLE_ATT_ERR_PREPARE_QUEUE_FULL 0x09 |
Too many prepare writes have been queued.
Definition at line 126 of file ble_error.h.
| #define BLE_ATT_ERR_READ_NOT_PERMITTED 0x02 |
The attribute cannot be read.
Definition at line 119 of file ble_error.h.
| #define BLE_ATT_ERR_REQUEST_NOT_SUPPORTED 0x06 |
Attribute server does not support the request received from the client.
Definition at line 123 of file ble_error.h.
| #define BLE_ATT_ERR_UNLIKELY_ERR 0x0E |
The attribute request has encountered an unlikely error, so the request could not be completed as requested.
Definition at line 131 of file ble_error.h.
| #define BLE_ATT_ERR_UNSUPP_GRP_TYPE 0x10 |
The attribute type is not a supported grouping attribute as defined by a higher layer specification.
Definition at line 133 of file ble_error.h.
| #define BLE_ATT_ERR_VALUE_NOT_ALLOWED 0x13 |
The attribute parameter value was not allowed.
Definition at line 136 of file ble_error.h.
| #define BLE_ATT_ERR_WRITE_NOT_PERMITTED 0x03 |
The attribute cannot be written.
Definition at line 120 of file ble_error.h.
| #define BLE_GAP_ERR_ADV_DATA_INVALID 0x4A |
Duplicate or invalid advertising data.
Definition at line 171 of file ble_error.h.
| #define BLE_GAP_ERR_CANCELED 0x44 |
Requested operation canceled.
Definition at line 165 of file ble_error.h.
| #define BLE_GAP_ERR_COMMAND_DISALLOWED 0x43 |
Request not allowed in current state.
Definition at line 164 of file ble_error.h.
| #define BLE_GAP_ERR_DISCONNECTED 0x46 |
Link connection is lost during operation.
Definition at line 167 of file ble_error.h.
| #define BLE_GAP_ERR_INSUFF_RESOURCES 0x4B |
Insufficient resources.
Definition at line 172 of file ble_error.h.
| #define BLE_GAP_ERR_INVALID_PARAM 0x40 |
| #define BLE_GAP_ERR_MISMATCH 0x4D |
Feature mismatch.
Definition at line 174 of file ble_error.h.
| #define BLE_GAP_ERR_NOT_FOUND 0x47 |
Search algorithm finished, but no result found.
Definition at line 168 of file ble_error.h.
| #define BLE_GAP_ERR_NOT_SUPPORTED 0x42 |
Request not supported by software configuration.
Definition at line 163 of file ble_error.h.
| #define BLE_GAP_ERR_PRIVACY_CFG_PB 0x49 |
Problem with privacy configuration.
Definition at line 170 of file ble_error.h.
| #define BLE_GAP_ERR_PROTOCOL_PROBLEM 0x41 |
Problem with protocol exchange, resulting in unexpected responses.
Definition at line 162 of file ble_error.h.
| #define BLE_GAP_ERR_REJECTED 0x48 |
Request rejected by peer device.
Definition at line 169 of file ble_error.h.
| #define BLE_GAP_ERR_TIMEOUT 0x45 |
Requested operation timeout.
Definition at line 166 of file ble_error.h.
| #define BLE_GAP_ERR_UNEXPECTED 0x4C |
Unexpected error.
Definition at line 173 of file ble_error.h.
| #define BLE_GATT_ERR_ATTRIBUTE_CLIENT_MISSING 0x54 |
No attribute client defined.
Definition at line 181 of file ble_error.h.
| #define BLE_GATT_ERR_ATTRIBUTE_SERVER_MISSING 0x55 |
No attribute server defined.
Definition at line 182 of file ble_error.h.
| #define BLE_GATT_ERR_BROWSE_NO_ANY_MORE 0x57 |
GATT browses no any more contents.
Definition at line 184 of file ble_error.h.
| #define BLE_GATT_ERR_CACHE_FINISH 0x59 |
GATT Cache is updated or checked.
Definition at line 186 of file ble_error.h.
| #define BLE_GATT_ERR_CACHE_UPDATING 0x58 |
GATT Cache in updating process.
Definition at line 185 of file ble_error.h.
| #define BLE_GATT_ERR_INVALID_ATT_LEN 0x50 |
GATT Specific Error.
Problem with ATTC protocol response.
Definition at line 177 of file ble_error.h.
| #define BLE_GATT_ERR_INVALID_PERM 0x56 |
Permission set in service/attribute is invalid.
Definition at line 183 of file ble_error.h.
| #define BLE_GATT_ERR_INVALID_TYPE_IN_SVC_SEARCH 0x51 |
Error in service search.
Definition at line 178 of file ble_error.h.
| #define BLE_GATT_ERR_SIGNED_WRITE 0x53 |
Signed write error.
Definition at line 180 of file ble_error.h.
| #define BLE_GATT_ERR_WRITE 0x52 |
Invalid write data.
Definition at line 179 of file ble_error.h.
| #define BLE_L2C_ENH_CB_RECONFIG_INVALID_CID 0x2E |
Reconfiguration failed - one or more Destination CIDs invalid.
Definition at line 141 of file ble_error.h.
| #define BLE_L2C_ENH_CB_RECONFIG_INVALID_MPS 0x2D |
Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time.
Definition at line 140 of file ble_error.h.
| #define BLE_L2C_ENH_CB_RECONFIG_INVALID_MTU 0x2C |
L2CAP Specific Error.
Reconfiguration failed - reduction in size of MTU not allowed.
Definition at line 139 of file ble_error.h.
| #define BLE_L2C_ENH_CB_RECONFIG_UNACCEPT_PARAM 0x2F |
Reconfiguration failed - other unacceptable parameters.
Definition at line 142 of file ble_error.h.
| #define BLE_L2C_ERR_CID_ALREADY_ALLOC 0x3E |
Channel identifier already allocated.
Definition at line 157 of file ble_error.h.
| #define BLE_L2C_ERR_CONNECTION_LOST 0x30 |
Message cannot be sent because connection is lost (disconnected).
Definition at line 143 of file ble_error.h.
| #define BLE_L2C_ERR_CREDIT_ERROR 0x3D |
Credit error: invalid number of credit received.
Definition at line 156 of file ble_error.h.
| #define BLE_L2C_ERR_INSUFF_AUTHEN 0x36 |
Connection refused because of insufficient authentication.
Definition at line 149 of file ble_error.h.
| #define BLE_L2C_ERR_INSUFF_AUTHOR 0x37 |
Connection refused because of insufficient authorization.
Definition at line 150 of file ble_error.h.
| #define BLE_L2C_ERR_INSUFF_CREDIT 0x3B |
No more credit.
Definition at line 154 of file ble_error.h.
| #define BLE_L2C_ERR_INSUFF_ENC 0x39 |
Connection refused because of insufficient encryption.
Definition at line 152 of file ble_error.h.
| #define BLE_L2C_ERR_INSUFF_ENC_KEY_SIZE 0x38 |
Connection refused because of insufficient encryption key size.
Definition at line 151 of file ble_error.h.
| #define BLE_L2C_ERR_INVALID_CID 0x33 |
Invalid Channel ID.
Definition at line 146 of file ble_error.h.
| #define BLE_L2C_ERR_INVALID_MPS_EXCEED 0x32 |
Invalid PDU length exceeds MPS.
Definition at line 145 of file ble_error.h.
| #define BLE_L2C_ERR_INVALID_MTU_EXCEED 0x31 |
Invalid PDU length exceeds MTU.
Definition at line 144 of file ble_error.h.
| #define BLE_L2C_ERR_INVALID_PDU 0x34 |
Invalid PDU.
Definition at line 147 of file ble_error.h.
| #define BLE_L2C_ERR_LEPSM_NOT_SUPP 0x3A |
Connection refused because LE_PSM is not supported.
Definition at line 153 of file ble_error.h.
| #define BLE_L2C_ERR_NO_RES_AVAIL 0x35 |
Connection refused because no resources are available.
Definition at line 148 of file ble_error.h.
| #define BLE_L2C_ERR_NOT_UNDERSTOOD 0x3C |
Command not understood by peer device.
Definition at line 155 of file ble_error.h.
| #define BLE_L2C_ERR_UNKNOWN_PDU 0x3F |
Unknown pdu.
Definition at line 158 of file ble_error.h.
| #define BLE_LL_ERR_ACL_CON_EXISTS 0x9B |
ACL Connection exits.
Definition at line 216 of file ble_error.h.
| #define BLE_LL_ERR_ADV_TO 0xCC |
Advertising Timeout.
Definition at line 261 of file ble_error.h.
| #define BLE_LL_ERR_AUTH_FAILURE 0x95 |
Authentication failure.
Definition at line 210 of file ble_error.h.
| #define BLE_LL_ERR_CHANNEL_CLASS_NOT_SUP 0xBE |
Channel class not supported.
Definition at line 250 of file ble_error.h.
| #define BLE_LL_ERR_COMMAND_DISALLOWED 0x9C |
Command Disallowed.
Definition at line 217 of file ble_error.h.
| #define BLE_LL_ERR_CON_LIMIT_EXCEED 0x99 |
Connection limit Exceed.
Definition at line 214 of file ble_error.h.
| #define BLE_LL_ERR_CON_TERM_BY_LOCAL_HOST 0xA6 |
Connection terminated by local host.
Definition at line 227 of file ble_error.h.
| #define BLE_LL_ERR_CON_TIMEOUT 0x98 |
Connection Timeout.
Definition at line 213 of file ble_error.h.
| #define BLE_LL_ERR_CONN_ACCEPT_TIMEOUT_EXCEED 0xA0 |
Connection rejected due to Accept connection timeout.
Definition at line 221 of file ble_error.h.
| #define BLE_LL_ERR_CONN_FAILED_TO_BE_EST 0xCE |
Connection failed to be established.
Definition at line 263 of file ble_error.h.
| #define BLE_LL_ERR_CONN_REJ_LIMITED_RESOURCES 0x9D |
Connection rejected due to limited resources.
Definition at line 218 of file ble_error.h.
| #define BLE_LL_ERR_CONN_REJ_SECURITY_REASONS 0x9E |
Connection rejected due to insecurity issues.
Definition at line 219 of file ble_error.h.
| #define BLE_LL_ERR_CONN_REJ_UNACCEPTABLE_BDADDR 0x9F |
Connection rejected due to unacceptable BD Addr.
Definition at line 220 of file ble_error.h.
| #define BLE_LL_ERR_CONTROLLER_BUSY 0xCA |
Controller is busy.
Definition at line 259 of file ble_error.h.
| #define BLE_LL_ERR_DIFF_TRANSACTION_COLLISION 0xBA |
Transaction collision.
Definition at line 247 of file ble_error.h.
| #define BLE_LL_ERR_EIR_TOO_LARGE 0xC6 |
Error: EIR too large.
Definition at line 256 of file ble_error.h.
| #define BLE_LL_ERR_ENC_MODE_NOT_ACCEPT 0xB5 |
Encryption mode not accepted.
Definition at line 242 of file ble_error.h.
| #define BLE_LL_ERR_HARDWARE_FAILURE 0x93 |
Hardware Failure.
Definition at line 208 of file ble_error.h.
| #define BLE_LL_ERR_HOST_BUSY_PAIRING 0xC8 |
Host pairing is busy.
Definition at line 258 of file ble_error.h.
| #define BLE_LL_ERR_INSTANT_PASSED 0xB8 |
Error, instant passed.
Definition at line 245 of file ble_error.h.
| #define BLE_LL_ERR_INSUFFICIENT_SECURITY 0xBF |
Insufficient security.
Definition at line 251 of file ble_error.h.
| #define BLE_LL_ERR_INVALID_HCI_PARAM 0xA2 |
Invalid parameters.
Definition at line 223 of file ble_error.h.
| #define BLE_LL_ERR_INVALID_LMP_PARAM 0xAE |
Invalid LMP parameters.
Definition at line 235 of file ble_error.h.
| #define BLE_LL_ERR_LINK_KEY_CANT_CHANGE 0xB6 |
Link Key cannot be changed.
Definition at line 243 of file ble_error.h.
| #define BLE_LL_ERR_LMP_COLLISION 0xB3 |
LMP Collision.
Definition at line 240 of file ble_error.h.
| #define BLE_LL_ERR_LMP_PDU_NOT_ALLOWED 0xB4 |
LMP PDU not allowed.
Definition at line 241 of file ble_error.h.
| #define BLE_LL_ERR_LMP_RSP_TIMEOUT 0xB2 |
LMP Response timeout.
Definition at line 239 of file ble_error.h.
| #define BLE_LL_ERR_MEMORY_CAPA_EXCEED 0x97 |
Memory capacity exceeded.
Definition at line 212 of file ble_error.h.
| #define BLE_LL_ERR_PAGE_TIMEOUT 0x94 |
BT Page Timeout.
Definition at line 209 of file ble_error.h.
| #define BLE_LL_ERR_PAIRING_NOT_ALLOWED 0xA8 |
Pairing not allowed.
Definition at line 229 of file ble_error.h.
| #define BLE_LL_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUP 0xB9 |
Pairing with unit key not supported.
Definition at line 246 of file ble_error.h.
| #define BLE_LL_ERR_PARAM_OUT_OF_MAND_RANGE 0xC0 |
Parameters out of mandatory range.
Definition at line 252 of file ble_error.h.
| #define BLE_LL_ERR_PIN_MISSING 0x96 |
Pin code missing.
Definition at line 211 of file ble_error.h.
| #define BLE_LL_ERR_QOS_NOT_SUPPORTED 0xB7 |
Quality of Service not supported.
Definition at line 244 of file ble_error.h.
| #define BLE_LL_ERR_QOS_REJECTED 0xBD |
Quality of Service rejected.
Definition at line 249 of file ble_error.h.
| #define BLE_LL_ERR_QOS_UNACCEPTABLE_PARAM 0xBC |
Quality of Service not supported.
Definition at line 248 of file ble_error.h.
| #define BLE_LL_ERR_REMOTE_DEV_POWER_OFF 0xA5 |
Remote device loses connection due to power failure.
Definition at line 226 of file ble_error.h.
| #define BLE_LL_ERR_REMOTE_DEV_TERM_LOW_RESOURCES 0xA4 |
Remote device loses connection due to low resources.
Definition at line 225 of file ble_error.h.
| #define BLE_LL_ERR_REMOTE_USER_TERM_CON 0xA3 |
Remote user terminates connection.
Definition at line 224 of file ble_error.h.
| #define BLE_LL_ERR_REPEATED_ATTEMPTS 0xA7 |
Repeated attempts.
Definition at line 228 of file ble_error.h.
| #define BLE_LL_ERR_RESERVED_SLOT_VIOLATION 0xC4 |
Reserved slot violation.
Definition at line 254 of file ble_error.h.
| #define BLE_LL_ERR_ROLE_CHANGE_NOT_ALLOWED 0xB1 |
Role Change not allowed.
Definition at line 238 of file ble_error.h.
| #define BLE_LL_ERR_ROLE_SWITCH_FAIL 0xC5 |
Role Switch failed.
Definition at line 255 of file ble_error.h.
| #define BLE_LL_ERR_ROLE_SWITCH_PEND 0xC2 |
Role switch pending.
Definition at line 253 of file ble_error.h.
| #define BLE_LL_ERR_SCO_AIR_MODE_REJECTED 0xAD |
SCO air mode Rejected.
Definition at line 234 of file ble_error.h.
| #define BLE_LL_ERR_SCO_INTERVAL_REJECTED 0xAC |
SCO Interval Rejected.
Definition at line 233 of file ble_error.h.
| #define BLE_LL_ERR_SCO_OFFSET_REJECTED 0xAB |
SCO Offset rejected.
Definition at line 232 of file ble_error.h.
| #define BLE_LL_ERR_SP_NOT_SUPPORTED_HOST 0xC7 |
Simple pairing not supported by host.
Definition at line 257 of file ble_error.h.
| #define BLE_LL_ERR_SYNC_CON_LIMIT_DEV_EXCEED 0x9A |
Synchronous Connection limit exceeded.
Definition at line 215 of file ble_error.h.
| #define BLE_LL_ERR_TERMINATED_MIC_FAILURE 0xCD |
Connection Terminated due to a MIC failure.
Definition at line 262 of file ble_error.h.
| #define BLE_LL_ERR_UNACCEPTABLE_CONN_INT 0xCB |
Unacceptable connection initialization.
Definition at line 260 of file ble_error.h.
| #define BLE_LL_ERR_UNKNOWN_CONNECTION_ID 0x92 |
Unknown Connection Identifier.
Definition at line 207 of file ble_error.h.
| #define BLE_LL_ERR_UNKNOWN_HCI_COMMAND 0x91 |
| #define BLE_LL_ERR_UNKNOWN_LMP_PDU 0xA9 |
Unknown PDU Error.
Definition at line 230 of file ble_error.h.
| #define BLE_LL_ERR_UNSPECIFIED_ERROR 0xAF |
Unspecified error.
Definition at line 236 of file ble_error.h.
| #define BLE_LL_ERR_UNSUPPORTED 0xA1 |
Not Supported.
Definition at line 222 of file ble_error.h.
| #define BLE_LL_ERR_UNSUPPORTED_LMP_PARAM_VALUE 0xB0 |
Unsupported LMP Parameter value.
Definition at line 237 of file ble_error.h.
| #define BLE_LL_ERR_UNSUPPORTED_REMOTE_FEATURE 0xAA |
Unsupported remote feature.
Definition at line 231 of file ble_error.h.
| #define BLE_SEC_ERR_AUTH_REQ 0x63 |
The pairing procedure cannot be performed as authentication requirements cannot be met due to IO incapability of one or both devices.
Definition at line 191 of file ble_error.h.
| #define BLE_SEC_ERR_BR_EDR_IN_PROGRESS 0x6D |
Indicate that the pairing over the LE transport failed due to a Pairing Request sent over the BR/EDR transport in process.
Definition at line 201 of file ble_error.h.
| #define BLE_SEC_ERR_COMMAND_NOT_SUPPORT 0x67 |
The SMP command received is not supported on this device.
Definition at line 195 of file ble_error.h.
| #define BLE_SEC_ERR_CONFIRM_VAL_FAIL 0x64 |
The confirm value does not match the calculated compare value.
Definition at line 192 of file ble_error.h.
| #define BLE_SEC_ERR_DHKEY_CHECK_FAIL 0x6B |
Indicate to the remote device that the DHKey Check value received doesn't match the one calculated by the local device.
Definition at line 199 of file ble_error.h.
| #define BLE_SEC_ERR_ENCRPT_KEY_SIZE 0x66 |
The resultant encryption key size is insufficient for the security requirements of this device.
Definition at line 194 of file ble_error.h.
| #define BLE_SEC_ERR_INVALID_PARAM 0x6A |
The Invalid Parameters error code indicates that the command length is invalid or that a parameter is outside of the specified range.
Definition at line 198 of file ble_error.h.
| #define BLE_SEC_ERR_KEY_DRIV_GEN_NOT_ALLOW 0x6E |
Indicate that the BR/EDR Link Key generated on the BR/EDR transport cannot be used to derive and distribute keys for the LE transport.
Definition at line 202 of file ble_error.h.
| #define BLE_SEC_ERR_LTK_MISSING 0x6F |
Indicate the LTK of peer devices missing.
Definition at line 203 of file ble_error.h.
| #define BLE_SEC_ERR_NUM_CMP_FAIL 0x6C |
Indicate that the confirm values in the numeric comparison protocol do not match.
Definition at line 200 of file ble_error.h.
| #define BLE_SEC_ERR_OOB_NOT_AVAILBL 0x62 |
The OOB data is not available.
Definition at line 190 of file ble_error.h.
| #define BLE_SEC_ERR_PAIRING_NOT_SUPPORT 0x65 |
Pairing is not supported by the device.
Definition at line 193 of file ble_error.h.
| #define BLE_SEC_ERR_PASSKEY_ENTRY_FAIL 0x61 |
| #define BLE_SEC_ERR_REPEAT_ATTEMPT 0x69 |
Pairing or authentication procedure is disallowed because too little time has elapsed since last pairing request or security request.
Definition at line 197 of file ble_error.h.
| #define BLE_SEC_ERR_UNSPECIFIED 0x68 |
Pairing failed due to an unspecified reason.
Definition at line 196 of file ble_error.h.
| #define BLE_SUCCESS 0x00 |
Operation is Successful.
Definition at line 116 of file ble_error.h.